Kalman filter¶
The Kalman Filter in Nyx is a sequential filter which can switch between conventional (CKF) and extended filtering (EKF). Both kinds of filters support a time update and measurement update functionality, respectively, a "covariance propagation/inflation" step without any new system measurement and a new state estimate and covariance computation provided a measurement of the system.
The only algorithmic difference between a CKF and an EKF is that, after a measurement update, the EKF will consider the state estimate as the new reference state of the system. On the contrary, the CKF will only keep track of the state deviation from the reference state and not change the propagator state.
Nyx performs a Joseph update for the covariance^{1}.
Moreover, Nyx no longer supports a square root information filter; if that is important to your application, reach out as it should not be too difficult to update the pre1.0 code to the latest version of Nyx.
Note
Please read the SNC MathSpec for details on the state noise compensation / process noise.
Nomenclature¶
 \(\Phi(t_i,~t_{i+1})\) : state transition matrix from time \(t_i\) to time \(t_{i+1}\)
 \(\mathbf{X}\): the estimated state
 \(\mathbf{X}^*\): the reference state
 \(\mathbf{\bar X}\): the propagated estimated state
 \(\mathbf{\hat X}\): the new estimated state after a measurement update
 \(\mathbf{Y}\): the system measurement vector
 \(y\): the measurement deviation, or prefit residual
 \(z\): the postfit residual
 \(\mathbf{G(\mathbf{X_i})}\): the computed measurement, i.e. the measurement computed from the estimated state
 \(R\): the measurement noise
 \(P\): the covariance matrix
 \(\bar P\): the propagated covariance matrix
 \(K\): the Kalman gain at
 \(\tilde H\): the measurement sensitivity matrix
 \(I_n\): the identity matrix of size n
 \(\gamma_i\): whatever the parameter \(\gamma\) represents at time \(i\)
Time update¶
The time update (also called prediction step) propagates the filter covariance and state deviation by one linearized step. It simply multiplies the STM with the previously computed state deviation and covariances.
Note
For an EKF, the state deviation is necessarily zero because we update the reference trajectory at each measurement update.
Measurement update¶
The measurement update will compute a new state estimate, its covariance, and its prefit and postfit residuals. Nyx follows these steps in order.

Propagate the covariance:
\[\bar P_i = \Phi(t_i,~t_{i+1})P_{i1}\Phi(t_i,~t_{i+1})^T\] 
Compute the measurement deviation, or prefit residual ^{2}:
\[y_i=\mathbf{Y_i}G(\mathbf{X_i})\] 
Compute the measurement sensitivity (using automatic differentiation):
\[\tilde H_i = \frac{\partial G(\mathbf{X_i})}{\partial \mathbf{X_i}}\] 
Compute the Kalman gain:
\[K_i = \bar P_i \tilde H_i^T (\tilde H_i \bar P_i \tilde H_i^T+R_i)^{1}\] 
Compute the postfit residual:

If in CKF mode, start with a time update of the state, as detailed in the previous section, then:
\[z_i = y_i  \tilde H_i \mathbf{\bar X_i}\] 
If in EKF mode,
\[z_i = y_i  K_i y_i\]


Compute the new state estimate:

If in CKF mode,
\[\mathbf{\hat X_i} = \mathbf{\bar X_i} + K_i z_i\] 
If in EKF mode,
\[\mathbf{\hat X_i} = K_i y_i\]


Finally, compute the new covariance (Joseph update) where the size of the identity matrix matches that of the estimated state:
\[P_i = (I_n  K_i \tilde H_i) \bar P_i (I_n  K_i \tilde H_i)^{1} + K_i R_i K_i^T \]
Note
In the output file, when the covariance is requested to be rotated (e.g. in the RIC frame), the operation performed is the following: